Carrier ComfortLink 6 Series Controls, Start-Up, Operation, Service, And Troubleshooting page 32

Table 20 — Run Status Mode and Sub-Mode Directory (cont)
KEYPAD
SUB-MODE
ENTRY
VERS
ENTER
Table 21 — How to Adjust Navigator Backlight from Configuration Mode
KEYPAD
SUB-MODE
ENTRY
DISP
ENTER
ENTER
ENTER
Table 22 — How to Adjust Navigator Contrast from Configuration Mode
KEYPAD
SUB-MODE
ENTRY
DISP
ENTER
ENTER
ENTER
ENTER
ESCAPE
ITEM DISPLAY
MBB
EXV
EMM
CP1
CP2
SCB
NAVI
ITEM DISPLAY
TEST ON/OFF
Enter Password
1111
TEST OFF
TEST ON
TEST ON
ITEM DISPLAY
TEST ON/OFF
Enter Password
1111
TEST OFF
TEST ON
TEST ON
ITEM
EXPANSION
CESR-131344-xx-xx
CESR-131172-xx-xx
CESR-131174-xx-xx
100233-1R1-xx-xx
100233-1R1-xx-xx
CESR-131226-xx-xx
CESR-131227-xx-xx
ITEM
EXPANSION
TEST DISPLAY LEDS
Enter password as required using ENTER
key after each number.
'OFF' will be flashing.
Change value to 'ON' ('ON' flashes).
Display Test is Enabled. The alarm and all
mode LED's light up. The Navigator will dis-
play all block segments.
Press arrow keys at the same time. The
Navigator will display 'Adjust Brightness.'
Use the up arrow key to brighten the back-
light and the down arrow key to dim the
backlight. Press the ESCAPE key when fin-
ished to exit the mode.
ITEM
EXPANSION
TEST DISPLAY LEDS
Enter password as required using ENTER
key after each number.
'OFF' will be flashing
Change value to 'ON' ('ON' flashes).
Display Test is Enabled. The alarm and all
mode LED's light up. The Navigator will dis-
play all block segments.
Press Enter and Escape keys at the same
time. The Navigator will display 'ADJUST
CONTRAST' with a percentage indication.
Use the up arrow key to increase contrast
and the down arrow key to decrease the
contrast. Press the ESCAPE key when fin-
ished to exit the mode.
32
COMMENT
xx-xx is Version number
xx-xx is Version number
xx-xx is Version number
xx-xx is Version number
xx-xx is Version number
xx-xx is Version number
xx-xx is Version number
COMMENT
COMMENT