Download Print this page
Neopost AutoStamp Getting Started
Neopost AutoStamp Getting Started

Neopost AutoStamp Getting Started

Advertisement

Quick Links

Adding Credit to your Autostamp
Ensure that your Autostamp
TM
is connected to the telephone wall socket by way of the
Modem Cable (as detailed under 'Connecting the Modem Cable' section of this document).
In order to add credit to your Autostamp
will have been sent to you separately.
Your Autostamp
TM
is programmed with the direct dial Credifon telephone number.
The Credifon Crediting System telephone number must be prefixed by the appropriate
outside line digit (for most systems this is a 9 or a 0), if your outside line is routed through
a switchboard (this procedure is detailed on pages 24 - 25 of your User's Guide).
You are now on your way to crediting your AutoStamp
1.
Press the Funds key
, the Recredit display will
be observed:
Press
to confirm.
2.
Enter your Credifon PIN.
3.
Enter the credit amount you wish to purchase (e.g. £20)
(£10 - £500 in units of £10).
Press:
, verify the amount before
proceeding (If incorrect, press
4.
Press
to confirm.
5.
Your AutoStamp
TM
will now connect to the Credifon Crediting System - showing
CONNECTING and TRANSACTING displays - and the credit will be added to your Autostamp
On completion of the crediting procedure, the following
display will be observed:
to go to Ready mode.
6.
Press
Note:
You will be prompted to connect to the Credifon Crediting System every 90 days.
This allows the Royal Mail to inspect your meter and help prevent possible fraud.
YOU ARE NOW READY TO USE YOUR AUTOSTAMP
For further details or in case of difficulty, please refer to the User's
If the Autostamp
is to be returned for any reason, please remove
TM
and retain the ink cartridge.
TM
(see page 24 of the User's Guide)
TM
, you will need your Credifon PIN, this
.
TM
{
RECREDIT?
£0.00
CREDIFON PIN
----
CREDIT ENTRY
£20.00
and start again).
RECREDIT DONE
£20.00
Guide.
AutoStamp
Please ensure that you have all components before
Location of installation
This equipment should be installed in close proximity to an easily accessible switched
power supply and telephone socket.
Start by removing the Autostamp
remove the white cardboard packing material before unpeeling the protective tape.
}
Your Carton Contains
1.
Autostamp
TM
2.
Ink Cartridge
3.
Power Supply
4.
User's Guide
5.
Getting Started Guide
6.
Weighscale
7.
Weighscale Cable
8.
Modem Cable
9.
Self Adhesive Labels
(30 off)
10. Meter Posting Envelopes
(10 off)
TM
.
11. Telephone Adaptor
Please retain all packaging for the Autostamp
TM
Items Sent Separately
Credifon PIN Number & Customised Memory Card with your own message.
Getting Started...
TM
starting
from its packing carton, open the front cover and
TM
1
7
3
4
11
5
to be returned in the event of a repair.
TM
01/02/2006 - 3400037E/F
2
6
9
8
10

Advertisement

loading
Need help?

Need help?

Do you have a question about the AutoStamp and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Neopost AutoStamp

  • Page 1 Your AutoStamp will now connect to the Credifon Crediting System - showing (10 off) CONNECTING and TRANSACTING displays - and the credit will be added to your Autostamp 11. Telephone Adaptor On completion of the crediting procedure, the following RECREDIT DONE display will be observed: £20.00...
  • Page 2 PLEASE the User’s Guide) Notes: 1. Remove the scale from the packaging and place close to the Autostamp WAIT a) The ink charging process may take a short while 2. Locate the scale cable, connect the round plug to the scale and the square...