Ir Remote Control Mode - Event Lighting PAR4X12B User Manual

IR Remote Control Mode

•
You must switch off wireless DMX function, select
•
Select
Key Function
Switch on/off IR function
Select auto colour switch mode
(CC) or auto colour pulse out
mode (CP) with different speed
Select sound active mode (SU)
with different sensitivity level
Select auto colour fade mode
(dE) with different speed
Select manual colour mode
Select intensity of LED full on
mode
Select intensity of static colour
(R255+G255+B255+W255+A25
5+U255)
Select intensity of static colour
(R255)
www.event-lighting.com.au
, then use IR remote to switch on IR remote control mode.
.
Display Description
Pressing <blackout> button to
to
switch on the fixture IR function,
or
fixture will go to CC12 auto colour
your last
switch mode or your last setting
setting
Pressing <blackout> button when
unit under IR mode, fixture will
blackout and on IR standby mode
Using <Auto> button to select CC
between
or CP mode, using
change speed.
Pressing <SOUND> button to
select SU mode, using
to change sensitivity level
Pressing <FADE> button to select
dE mode, using
change speed.
Pressing <MANUAL> button to
to
entry manual colour mode
Using
button to cycle though 20% change
of intensity of each colour
separately.
Pressing <MANUAL> button to quit
to
manual colour mode, fixture will
blackout
Pressing <%> button to cycle
though 10% change of intensity on
to
static colour
(R255+G255+B255+W255+A255+
U255) mode.
to
Using
intensity
to
Using
intensity
6
to
to
to change
to change