Table of Contents
Advertisement
42
| Service
Menu Level 1
Service
Language
Service
Versions
Service
Firmware
Service
Alarms
9
Service
9.1
Warnings
Danger
• Make sure that the mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections and maintenance work must be carried out by an authorized installer and in
accordance with local rules and regulations.
Menu Level 2
Functions
Factory reset
Language
Language ENGLISH
Version VTR 100/B Lite
CD
EC
xxx
xxx
Appl.
xxx
xxx
Boot
Firmware
CD
EC
xxx
xxx
Unit
xxx
xxx
Gate-
way
YES
/NO
Update
Alarms
Fan
Frost
Bypass
Rot
Pb Fail
Temp
Filter
Low SS
Defrost
RH
Menu Level 3
Modbus
Gateway
Gateway
State Not present/...
Factory reset
Really reset? YES/NO
Explanation
Shows current status of
communication.
Use this dialogue frame to return
to factory settings.
Set YES or NO
Note:
This will erase all your
personal settings that
have been done for the
unit.
Use this dialogue frame to return
to select your local language.
Set Language by turning the
SELECTION knob.
Shows current software versions
Note:
The software versions are
just an example and may
differ in a specific unit.
Use this dialogue frame to
update firmware.
Set YES or NO.
Shows current version of the
unit and Z-wave Gateway.
Shows the alarms that have
been triggered. See alarm list
(chapter 9.5)
212962 | v02
Advertisement
Table of Contents
