Contents Overview ............1 4.6.3 Checking the roof cowl (if fitted)........12 General Description ........1 4.6.4 Checking and cleaning the Warranty ..........1 duct system ......12 Type label..........1 Troubleshooting..........12 Warnings............1 Electrical data ..........13 Operation ............2 Disposal and recycling ........13 SAVE LIGHT control panel ......2 3.1.1 Indicators .........2...
For the assertion of warranty claims, the products must be correctly connected and operated, and used in accordance with the data sheets. Further prerequisites are a completed maintenance plan with no gaps and a commissioning re- port. Systemair will require these in the case of a warranty claim. Type label Before calling your service representative, make a note of the specification and production number from the type label, which can be found next to the external connections and inside of the unit.
| Operation Warning • This product is not intended to be used by children or people with reduced physical or mental ability or lack of experience and knowledge, if no instruction concerning the use has been given by the person responsible for their safety or that this person is supervising the operation.
Operation | Refresh Auto — flashing High Normal (Minimum) (Maximum) slowly Automatic The fan can be Fan speed – 25% Fan speed – 45% Fan speed – 70% Sets speed of airflow control. set to Off by both supply and activating extract air fans Available only...
| Operation SAVE TOUCH control panel / SAVE CONNECT Settings are done by touching the icons or options. The touch screen is sensitive and it is not necessary to press too hard. SAVE CONNECT solution (mobile application and Internet access module) has a similar menu structure and functionality as SAVE TOUCH control panel, so this section can also be used as a guide for the mobile application.
Operation | Touch the alarm bar on the home screen to see all active alarms. Touch HELP button to know more about the alarm. To clear the alarm, touch ACKNOWLEDGE button. Note: The underlying cause of the alarm must be resolved first otherwise the alarm will appear again. If the problem continues contact your installation company or place of purchase.
Page 10
| Operation Duration have to be set for temporary user modes. SAVE VTC 200 – 1 will return to its previous working mode after the set time expires. Note: AUTO mode is available for selection only if the optional Demand Control, Week Schedule and/or external fan control functions are activated.
Operation | Icon Text Description Sets speed of both supply and extract air fans to Maximum levels to replace Refresh indoor air with a fresh air in a short period of time. Set duration in minutes. Sets speed of supply air fan to High level and extract air fan to Low level to increase air pressure within the apartment for better smoke extraction through Fireplace the chimney.
| Operation 3.2.8 To set a week schedule While in home screen, touch menu icon and select Week Schedule. The menu is locked by default. Enter a password (default password is 1111). Touch icon at the bottom left corner of the screen to add a new schedule or press EDIT button to modify already added schedule.
1. It is recommended to do this every 5 years and is normally carried out by authorized companies specialized in this area. • Use original spare parts from Systemair only. • Scan the code on the type label to find a spare part list.
| Maintenance To clean the air chambers Danger • Make sure that the Mains supply to the unit is disconnected before performing any maintenance or electrical work! Dust and dirt collect in the air chambers inside the product. The product must be cleaned periodically. 1.
Maintenance | 4.4.2 To select a different filter kit Standard filters are designed for good outdoor air quality. It is possible to se- lect and order filter kits for poorer air quality environment. To change filter kit type 1. Touch Select different filter kit button in the alarm menu. Alternatively, go to Filter menu (3.2.2 Home screen overview, page 4, pos.
| Troubleshooting 4.6.2 Checking the outdoor air intake Leaves and pollution could plug up the air intake grille and reduce the capacity. Check the air intake grille, and clean as necessary. It is recommended to do this at least twice a year. 4.6.3 Checking the roof cowl (if fitted) The roof cowl (if fitted) connected to the exhaust air duct needs to be checked at least twice a year and cleaned if...
Page 17
Electrical data | 5. Check if user modes Holiday, Away or Crowded are activated on the control panel or via a hardwired switch. 6. Check the analogue inputs in the service menu to verify that the temperature sensors are functioning correctly. 7.
Page 18
Systemair UAB Linų st. 101 LT–20174 Ukmergė, LITHUANIA Phone +370 340 60165 Fax +370 340 60166 www.systemair.com...