Using The Pop Features; Using The Pop Double-Window Feature - Toshiba TheaterWide 51H94 Owner's Manual

Integrated hd projection television
Hide thumbs Also See for TheaterWide 51H94:
Table of Contents

Advertisement

Using the POP features

Using the POP double-window feature

The POP (picture-out-picture) double-window feature splits the screen into two
windows so you can watch two programs at the same time.
To display a program in the POP window:
1. Select the program you want to watch in the main window.
2. Press SPLIT to open the POP window.
Main window
3. Press • to highlight the POP window (will have a green border).
4. Press INPUT to open the Pop Input Selection window. Select the input source
for the POP window by pressing the corresponding Number button (0–7).
The current source displays in purple in the Pop Input Selection window.
To close the POP window and tune to the currently highlighted window:
Press ENTER after highlighting the window you want to view as a normal
picture.
To close the POP window:
Press SPLIT or EXIT.
Notes about recording:
• When the POP window is open and you start recording, the POP window
will close and recording will start.
• If you use the TV's remote control to start recording, you will not be able
to open the POP window. If you attempt to do so, the message "Not
Available" will appear on-screen.
• It is recommended that you use the TV's remote control to start
recording. If you use a device other than the TV's remote control to start
recording, you may be able to open the POP window during the
recording process. If this happens, the recorded audio will reflect the
audio of the active window (main or POP), which may not be the audio
you intended to record.
74
H94(E)067-76(8a-UseTV)
74
Chapter 8: Using the TV's features
ANT1
POP
TV12
Video1
Green border
(denotes active window)
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
Note:
• When the main window is in the ANT1 or ANT2
mode, the ANT1 and ANT2 inputs cannot be
selected for the POP window.
• When the main window is in Video 1/2/3,
ColorStream HD1/HD2, or HDMI mode, those
inputs cannot be selected for the POP window.
• You cannot view IEEE-1394 source programs in
the POP window.
• You cannot view two video or two antenna sources
in both the main and POP windows simultaneously.
POP window
(You can view a video source in one window and
an antenna source in the other.)
+10
100
ACTION
MENU
ENTER
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows, black/gray
bars in wide-screen or PIP/POP formats,
stock tickers, video game patterns, TV
station logos, closed captions, and
websites) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY.
8/3/04, 6:09 PM
Numbers
INPUT
SPLIT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Theaterwide 57h94

Table of Contents