Led Indications; Tv Guide On Screen Faqs - Toshiba TheaterWide 51H94 Owner's Manual

LED indications

The green and red LED lights are on the TV front panel, to the right of the POWER button.
LED Indication
Green blinks 3 times (after the
power cord is plugged in).
Green lights solid.
Red lights solid.
Red blinks.
Green blinks at 3-second intervals. The fan for cooling the CableCARD has stopped. Press POWER to turn OFF the TV , unplug the power cord,
TV Guide On Screen
The following are frequently asked questions about the TV Guide On Screen system. The answers represent the most likely solutions to the
problem.
SETUP
1. Q: What if I move and my ZIP code or postal code
changes?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
information (see Chapter 3 for details). It can take up to
24 hours to receive new data.
2. Q: What if I change my cable hook-up to antenna or vice
versa?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
input information and rescan channels for the new input
(see Chapter 3 for details).
3. Q: What if I change cable boxes?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
input information and rescan channels for the new input
(see Chapter 3 for details).
94
H94(E)092-97(10-Trbl) 94
Chapter 10: Troubleshooting
LEDs
MENU VOLUME CHANNEL EXIT TV/VIDEO TouchFocus
Description
Wait about 30 seconds until the Green LED lights continuously, and then press POWER to turn ON the TV.
Indicates that the TV power cord is plugged in and the power is OFF. This is called "standby mode. "
Indicates that the TV power cord is plugged in and the power is ON.
Press POWER to turn OFF the TV, and unplug the power cord. Plug in the power cord again and press POWER to
turn ON the TV. If the problem persists, turn OFF the TV, unplug it, and contact a Toshiba Authorized Service Center.
and contact a Toshiba Authorized Service Center.
®
FAQs
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
L/MONO R
S-VIDEO VIDEO RESET
AUDIO
4. Q: I used to have a cable box, but now I get direct cable.
What do I do?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
input information and rescan channels for the new input
(see Chapter 3 for details).
5. Q: If I add a recorder or change my cable service, how do I
change my Setup information?
A: Highlight SETUP in the Service Bar. Press z to highlight
CHANGE SYSTEM SETTINGS (page 65), and then
press ENTER. Follow the on-screen prompts to enter new
information (see Chapter 3 for details). It can take up to
24 hours to receive new data.
6. Q: Why does it take up to 24 hours for the TV Guide
On Screen system to be ready for use?
A: The initial setup process consists of finding the stations in
your area that carry the TV Guide On Screen system data
and tuning to those stations to receive the setup and
listings data.
8/5/04, 11:28 AM