Table of Contents
Advertisement
Quick Links
O
WNER'S
Projection Television
51H85C
57H85C
65H85C
M
ANUAL
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model:
Serial No.:
23566608
YC/N
Advertisement
Table of Contents
Related Manuals for Toshiba 51H85C
Summary of Contents for Toshiba 51H85C
- Page 1 Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model: Serial No.: 23566608...
-
Page 2: Important Safety Information
Dear Customer, Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions... -
Page 3: Important Safety Instructions
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. - Page 4 Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 27) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen.
- Page 5 If you do not have the insert, you can download a copy of it from our Web site www.toshiba.ca. If you do not have access to the Internet, call 1-800-268-3404. WARNING: If you split the cabinet for any purpose, NEVER energize the bottom section until it is completely and properly installed.
-
Page 6: Table Of Contents
Important Safety Information ... 2-5 Introduction ... 7 Welcome to Toshiba ... 7 Exploring your new TV ... 7 Connecting your TV ... 8 Connecting a VCR ... 9 Connecting a cable converter box ... 9 Connecting a cable converter box and VCR ... 10 Connecting a DVD player or satellite receiver and a VCR ... -
Page 7: Introduction
Congratulations! You have purchased one of the finest projection TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. This manual applies to models 51H85C, 57H85C, and 65H85C. -
Page 8: Connecting Your Tv
HDMI cable is for use with video equipment that has an HDMI type A connector (see page 15). NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV: For GOOD picture quality: Use a standard yellow video cable. For BETTER picture quality: If your equipment has an S-video input, use an S-video cable instead of a standard yellow video cable. -
Page 9: Connecting A Vcr
Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel. You will need: • two coaxial cables • one set of standard A/V cables From Cable Box or Antenna Stereo VCR IN from ANT OUT to TV... -
Page 10: Connecting A Cable Converter Box And Vcr
Connecting a cable converter box and VCR This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1. To view premium channels or record with the VCR, select ANT-2, tune the TV and VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. -
Page 11: Connecting A Dvd Player Or Satellite Receiver And A Vcr
Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel. You will need: • two (or three, if satellite receiver is used) coaxial cables •... -
Page 12: Connecting A Dvd Player With Colorstream (Component Video) And A Vcr
Your TV has ColorStream (component video) inputs. Connecting your TV to a DVD player with component video inputs (such as a Toshiba DVD player with ColorStream quality and realism. – To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch. -
Page 13: Connecting A Dtv Receiver/Set-Top Box With Colorstream (Component Video) And A Vcr
Connecting a DTV receiver/set-top box with ® ColorStream (component video) and a VCR This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV has ColorStream (component video) inputs. Connecting your TV to a DTV receiver with component video inputs can greatly enhance picture quality and realism. -
Page 14: Connecting Two Vcrs
Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You can also record from one TV channel while watching another TV channel. You will need: • two coaxial cables •... -
Page 15: Connecting An Hdmi™ Or A Dvi Device To The Hdmi Input
Connecting an HDMI or a DVI device to the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. This input is designed to accept HDCP material in digital form from EIA/CEA-861/861B–... -
Page 16: Connecting An Audio System
Connecting an audio system This connection allows you to use an audio amplifier and external speakers and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see “Turning off the built-in speakers” on page 57). -
Page 17: Using The Remote Control
(home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices. See pages 20–21. If you have a non-Toshiba device or a Toshiba device... -
Page 18: Programming The Remote Control To Operate A Cable Converter Box, Satellite Receiver, Vcr, Dvd Player, Or Htib (Home Theater In A Box)
DVD player, or HTIB (home theater in a box) Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. - Page 19 Star Choice: 057 Memorex: 039 Star Trak: 025, 026, 037, Mintek: 040 NAD: 026 STS: 024 Nakamichi: 041 Toshiba: 000, 001, 002, Norcent: 043 003, 004, 005, 006, Onkyo: 044 007, 020, 031, 056 Oritron: 058 Uniden: 021, 028, 030,...
-
Page 20: Using The Remote Control To Operate A Cable Converter Box, Satellite Receiver, Vcr, Dvd Player, Or Htib (Home Theater In A Box)
VCR, DVD player, or HTIB (home theater in a box) If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). -
Page 21: Remote Control Function Key Chart
Remote Control function key chart Key Label Toshiba TV POWER Power TV/VIDEO Input RECALL/INFO On-screen display Digit 1 Digit 2 Digit 3 Digit 4 Digit 5 Digit 6 Digit 7 Digit 8 Digit 9 Digit 0 100/-/+10 CH RTN/ENT Previous channel... -
Page 22: Learning About The Remote Control
Learning about the remote control The buttons used for operating the TV only are described here. turns the TV on and off POWER displays screen information (page 58) RECALL sets the TV to turn off at a specific time (page 52) SLEEP selects video input source (page 50) TV/VIDEO... -
Page 23: Setting Up Your Tv
Setting up your TV Learning about the menu system After you have installed the batteries and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the menu using the buttons on your TV or remote control. -
Page 24: Changing The On-Screen Display Language
Changing the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen display of adjustment menus and messages. To select a language: 1. Press MENU, and then press x or • until the SET UP menu appears. -
Page 25: Adding Channels To The Tv's Memory
Adding channels to the TV’s memory When you press Channel y or z, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below and on the next page to program all active channels into the TV’s memory. -
Page 26: Adding And Erasing Channels Manually
Adding and erasing channels manually After you have programmed the channels automatically, you can manually add or erase specific channels. To manually add or erase channels: 1. Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons. -
Page 27: Adjusting The Color Convergence
Adjusting the color convergence This projection TV uses three separate TV tubes: red, green, and blue. The red, green, and blue images are projected onto the screen where they converge to form a full-color picture. You can see a clear picture only when the three images converge correctly. - Page 28 6. Press y (up), z (down), x (left), or • (right) on the remote control to converge the red or blue line into the white line. : TO ADJUST RED ENTER : TO CHANGE COLOR EX I T : TO F I N I SH ADJUSTMENT : TO ADJUST BLUE ENTER : TO SELECT POS I T I ON EX I T...
-
Page 29: Using The Tv's Features
Using the TV’s features Adjusting the channel settings Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1. Select the first channel (or video mode) you want to view. 2. - Page 30 3. Press ENTER to display the FAVORITE CH menu. CH INPUT will be highlighted. FAVOR I TE CH – – – I NPUT – – – – – – – – – – – – – – – – – – –...
-
Page 31: Labeling Channels
Labeling channels Channel labels appear above the on-screen channel number display each time you turn on the TV, change a channel, or press RECALL. You can choose any four characters to identify a channel. To create channel labels: 1. Press MENU, and then press x or • until the CUSTOM menu appears. -
Page 32: Viewing The Wide-Screen Picture Formats (480I, 480P And 1080I Signals Only)
Viewing the wide-screen picture formats (480i, 480p and 1080i signals only) You can view 480i and 480p format programs in a variety of picture sizes—Natural, TheaterWide 1, TheaterWide 2, TheaterWide 3, and Full. (The Full picture size is not selectable for 1080i format program.) The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing. - Page 33 TheaterWide 1 picture size (For 4:3 format programs) • The picture is non-uniformly enlarged—the center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. • A small part of the picture at the top and bottom is hidden;...
-
Page 34: Scrolling The Theaterwide
® Scrolling the TheaterWide picture (TheaterWide 2 and 3 only) 1. Press PIC SIZE to select the TheaterWide 2 or 3 mode. 2. Press MENU, and then press x or • until PICTURE menu appears. 3. Press y or z to highlight PICTURE SCROLL. P I CTURE P I CTURE S I ZE AUTO ASPECT... -
Page 35: Using The Auto Aspect Feature
Using the AUTO ASPECT feature When the AUTO ASPECT feature is set to ON and the TV receives a 480i signal (other than HDMI imput source), the picture size is automatically selected (as described in the following table). Aspect ratio of signal source when AUTO ASPECT is ON) 4:3 Normal 16:9 Full... -
Page 36: Using The Pop Double-Window Feature
Using the POP double-window feature The POP (picture-out-picture) feature splits the screen into a double window that allows you to watch two programs at the same time. The POP program can come from a TV broadcast or an external source, such as a VCR. -
Page 37: Switching The Main And Pop Pictures
Switching the main and POP pictures Press SWAP while you are using the POP feature to switch the main and POP pictures. Switching the speaker sound of main and POP programs Press x or • while you are using the POP feature to switch the sound (main or POP) from the speakers. -
Page 38: Double-Window Aspect Ratio
Double-Window aspect ratio The Double-Window feature displays each picture according to its input signal aspect ratio, as illustrated below. 480i 480i Using the programmed channel search function You can use the programmed channel search function to quickly scan the channels you programmed into the TV’s memory (page 25). 1. -
Page 39: Using The Favorite Channel Search Function
Using the favorite channel search function You can use the favorite channel search function to quickly scan your favorite channels (see “Programming your favorite channels” on page 29). 1. Press FAVORITE. The TV automatically enters multi-window mode, and begins a twelve-picture scan of your favorite channels. -
Page 40: Using The Locks Menu
Using the LOCKS menu The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and New PIN Code functions. You can use these functions after entering the correct PIN code. Entering the PIN code 1. Press MENU, and then press x or • until the LOCKS menu appears. -
Page 41: Enable Blocking
ENABLE BLOCKING 1. From the LOCKS menu, press z or y to highlight V-CHIP, and then press ENTER. The V-CHIP menu appears. 2. Press z or y to highlight ENABLE BLOCKING, and then press ENTER. ENABLE BLOCK I NG TV RAT I NG MPAA RAT I NG BLOCK I NG OPT I ON LOCKS MENU... -
Page 42: Mpaa Rating (Independent Rating System For Movies)
MPAA RATING (Independent rating system for movies) 1. From the V-CHIP menu, press z or y to highlight MPAA RATING, and then press ENTER. MPAA RATING menu appears. 2. Press y or z to highlight MPAA RATING. 3. Press • to lock (“X”) or press x to unlock (“... -
Page 43: Unlocking Programs Temporarily
Unlocking programs temporarily 1. If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. After 4 seconds, the TV automatically starts the auto favorite channel search function (see page 39). You can either unlock the program temporarily (see steps 2-4) or select an unlocked program to watch. - Page 44 To unlock individual channels: 1. From the LOCKS menu, press y or z to highlight CH LOCK, then press ENTER. The CH LOCK menu appears. 2. Press yzx • to highlight the channel you want to unlock, then press ENTER. CH LOCK I NPUT –...
-
Page 45: Locking The Video Inputs
Locking the video inputs With the VIDEO LOCK feature, you can lock out the input sources (Video 1, Video 2, Video 3, ColorStream HD1, ColorStream HD2, HDMI) and channels 3 and 4. You will not be able to select the input sources with the TV/VIDEO button or Channel buttons unless you clear the setting. -
Page 46: Adjusting The Picture
Adjusting the picture Selecting the picture mode You can select your desired picture type from four picture modes: Sports, Standard, Movie, and Preference. Mode Picture Quality Sports Bright and dynamic picture (factory setting) Standard Standard picture setting (factory setting) Movie Movie-like picture setting (factory setting) Preference Your personal preference*... -
Page 47: Saving Your New Preferences
Saving your new preferences You can save the PICTURE qualities you adjusted (contrast, brightness, color, tint, sharpness, color temperature and CableClear DNR) in the picture PREFERENCE mode. To save your new preferences: 1. Press MENU, and then press x or • until the PICTURE menu appears. -
Page 48: Using The Cableclear Dnr Feature
® Using the CableClear DNR feature CableClear ® DNR reduces visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a video cassette or disc damaged by repeated use. To turn on CableClear DNR: 1. -
Page 49: Selecting The Display Format
Selecting the display format (for 480p signals only) Use this feature to convert 480p input signals to 540p or 1080i. To select the display format: 1. Press MENU, and then press x or • until the PICTURE menu appears. 2. Press y or z to highlight DISPLAY FORMAT, and then press ENTER. -
Page 50: Selecting The Video Input Source
Selecting the video input source Press TV/VIDEO on the remote control or TV front panel to view a signal from another device connected to your TV, such as a VCR or DVD player (see illustrations below). You can select ANT 1, VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, HDMI, or ANT 2, depending on which input jacks are used for connecting the devices (see “Connecting your TV”... -
Page 51: Using The Closed Caption Feature
Using the closed caption feature The closed caption feature has two options: • Captions—An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually designated as “CC” in program listings). • Text—An on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations). -
Page 52: Setting The On Timer
Setting the ON timer To set the ON timer to turn on the TV automatically: 1. Press MENU, and then press x or • until the CUSTOM menu appears. 2. Press y or z to highlight ON TIMER, and then press ENTER. 3. -
Page 53: Setting The Clock
Setting the clock To set the clock: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z to highlight CLOCK SET, and then press ENTER. 3. Press the Number buttons (0-9) to enter the correct time. The clock operates on a 24-hour cycle. -
Page 54: Adjusting The Sound
Adjusting the sound Muting the sound Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE) the sound. While the sound is off, the screen will display “1/2 MUTE” or “MUTE” in the lower right corner. Every time you press MUTE, the mute mode will change in the following order. -
Page 55: Using The Wow™ Surround Sound Feature
Using the WOW™ surround sound feature WOW is a special combination of SRS Labs audio technologies that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. To adjust the WOW feature: 1. -
Page 56: Resetting Your Audio Adjustments
Resetting your audio adjustments The RESET function returns the audio adjustments to the following factory settings: Bass ... center (50) Treble ... center (50) Balance ... center (0) To reset the audio adjustments: 1. Press MENU, and then press x or • until the AUDIO menu appears. -
Page 57: Turning Off The Built-In Speakers
Turning off the built-in speakers Use this feature to turn off the TV speakers when you connect an audio system (See “Connecting an audio system” on page 16). To turn off the built-in speakers: 1. Press MENU, then press x or • until the AUDIO menu appears. -
Page 58: Selecting The Background Of The Menu Display
Selecting the background of the menu display You can change the background of the menu display by selecting from two preset backgrounds: shaded and solid (gray). To select the background: 1. Press MENU, and then press x or • until the CUSTOM menu appears. -
Page 59: Appendix
• This model may not be compatible with features and/or specifications that may be added in the future. WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center. Television System NTSC standard... -
Page 60: Troubleshooting
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions. Symptom TV will not turn on No picture, no sound No sound, picture OK Poor picture, sound OK Poor reception of broadcast channels Cannot receive above channel 13 Black box appears on the screen Unable to select a certain channel... -
Page 61: Limited Canada Warranty
Limited Canada Warranty for 32'' and Larger Television Models Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. -
Page 62: Index
Index A/V cables (standard) ... 8 ANT 1/2 ... 24 Antenna cables (coaxial) ... 8 AUDIO OUT sound, selecting ... 57 Audio system connection ... 16 Auto aspect ... 35 Auto convergence ... 27 Auto favorite ... 39, 43 Auto power off ...58 BACKGROUND selection ...58 Back of the TV ... - Page 63 Notes...
- Page 64 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C., V6W 1J5, CANADA – TEL: (604) 303-2500 MANUFACTURED BY CableClear, ColorStream, StableSound, TheaterWide, and TouchFocus are registered trademarks of Toshiba America Consumer Products, L.L.C. SurfLock is a trademark of Toshiba America Consumer Products, L.L.C.