Adjusting The Audio Quality; Using The Stablesound ™ Feature; Resetting Your Audio Adjustments - Toshiba TheaterWide 51H94 Owner's Manual

Adjusting the audio

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
DVD RTN
Navigate Select Back
CH RTN
3. Press z to highlight the item you want to adjust (BASS,
TREBLE, or BALANCE).
Aidio Settings
Audio Settings
Bass 50
Treble 50
0
Balance
StableSound
Reset Save
4. Press x or • to adjust the level.
• x makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
• • makes the bass or treble stronger or increases the balance
in the right channel (depending on the item selected).
5. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To reset the audio quality to the factory settings:
Highlight RESET in step 5 above, and press ENTER.
The bass and treble are reset to 50 and the balance is reset
to 0.
Audio Settings Aidio Settings
Bass 50
Treble 50
0
Balance
StableSound
Reset Save
82
H94(E)077-83(8b-UseTV) 82
Chapter 8: Using the TV's features
(continued)
Exit
EXIT
off
Done
off
Done
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
Using the StableSound
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound ® feature:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
3. Press z to highlight STABLE SOUND, and then press •
to select ON.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
DVD RTN
Navigate Select Back Exit
CH RTN EXIT
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To turn off the StableSound feature:
Select OFF in step 3 above.

Resetting your audio adjustments

The RESET function returns your audio adjustments to the
following factory settings:
Bass ............. center (50)
Treble .......... center (50)
Balance ........ center (0)
StableSound ... OFF
To reset your audio adjustments:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
3. Press z to highlight RESET and press ENTER.
Aidio Settings
Audio Settings
Bass 50
Treble 50
0
Balance
StableSound off
Reset Save Done
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
8/3/04, 6:37 PM
®
feature
Aidio Settings
Audio Settings
Bass 50
Treble 50
Balance 0
StableSound off
Reset Save Done