Setting The Time And Date; Viewing The Cablecard ™ Menu - Toshiba TheaterWide 51H94 Owner's Manual

Setting the time and date

Note: If you already set up the TV Guide On Screen system, the
time and date were set automatically and you can skip this step.
To set the time and date:
1. Press MENU and open the SETUP menu.
2. Highlight INSTALLATION and press ENTER. (A new set
of INSTALLATION menu icons will appear on-screen, as
shown in step 3 below.)
3. Open the TIME AND DATE menu, highlight
START SETUP, and press ENTER.
Setup
Installation
Sleep Timer
On/Off Timer
HDMI Audio Selection Auto
Side Show Interval
2 Sec
AVHD Skip Time
15 min
Convergence
DVD RTN
Navigate Select Back
CH RTN
Time And Date
Start Setup
DVD RTN
Navigate Select Back
CH RTN
If you have not set up the TV Guide On Screen system, the
following screen will appear. To set the time, highlight
TV GUIDE ON SCREEN and press ENTER. The TV
Guide On Screen setup sequence will start, and the time
and date will be set automatically.
Time And Date
Your TV Guide On Screen System can provide
accurate time and date information.
It is recommended you set up TV Guide On Screen
first and use it to obtain the time and date.
Manual TV Guide On Screen
Note:
• If you highlight TV GUIDE ON SCREEN (above) to set the
time and date through the TV Guide On Screen system and a
power outage occurs, the time and date will be updated
automatically when the power is restored.
• If you highlight MANUAL (above) to set the time and date
manually and a power outage occurs, you will lose the time
and date settings when the power is restored.
• If you manually set the time and date and then perform TV
Guide On Screen setup, the manual time and date settings
will be overridden by the TV Guide On Screen settings.
H94(E)044-52(6b-Setup) 51
Chapter 6: Setting up your TV
Exit
EXIT
Exit
EXIT
Cancel
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
Viewing the CableCARD
A CableCARD enables you to view encrypted digital channels.
See page 12 for connection and subscription information.
After the CableCARD is inserted, a CableCARD option appears
in the APPLICATIONS menu, with informational screens
provided by your digital CableCARD service (see illustrations
below).
CableCard Connected -- Acquiring
channel information.
CableCard services will only operate
with cable signal connected to Antenna 1.
OK
To view the CableCARD menu:
1. Press MENU and open the APPLICATIONS menu.
2. Highlight CableCARD and press ENTER.
3. A side menu will display. Highlight one of the side menu
items and press ENTER to display the information.
Note: The CableCARD menu has no user-adjustable options
and is for informational purposes only.
8/5/04, 7:18 AM
™
menu
Applications
TV Guide On Screen Conditional Access
Digital CC Selector CableCARD(tm) Pairing
Picture Viewer CableCARD(tm) Status
CableCARD Network Setup
DVD RTN
Navigate Select Back Exit
CH RTN EXIT
51