Cable Housing Installation - Argon 18 E-119 TRI 283A Assembly Manual

E-119 TRI 283A: 12. Cable Housing Installation (Gears)
Suggested lengths of the cable housing inside the frame
(medium frame is used as a reference)
Cable housing/length
A FRONT brakes
(CGX 5mm)
B1
REAR brakes
(grey E-Z Bend) Handlebar Section
B2
REAR brakes
(KEB 5mm) Frame Section
C FRONT derailleur
(LEX 4mm)
D1
REAR derailleur
(LEX 4mm) Frame Section
D2
REAR derailleur
(LEX 4mm) End Section
32cm
40cm
70cm
120cm
120cm
18cm
For mechanical version there are two
sections (handlebar and frame)
1. Handlebar: from the shifters extensions,
use full housing to connect the shifters
to the derailleurs. Make sure that you are
able to turn the handlebar without causing
any interference between the two housing
lengths.
34