Cable Housing Installation - Argon 18 E-118 Assembly Manual

E-118 NEXT 216A: 5. Cable housing installation
5.3
Suggested lengths of the cable housing*
(the medium frame is used as a reference)
Cable housing/length
FRONT brakes
(KEB leftover)
REAR brakes 106.5cm
(Gray EZ-Bend housing)
FRONT derailleur 140cm
REAR derailleur 198cm
* For guidance purposes only. Can vary according to the shifters used.
XS S M L
40cm 41cm 43cm 45.5cm
108cm 110cm 112.5cm
142cm 144cm 150cm
200cm 202cm 204cm
5.4
5.2
5.1 Install the rear derailleur cable
housing starting at the drive side's
drop-out.
5.2 Install the front derailleur cable
housing starting under the bottom
bracket shell.
5.3 Install the front brake cable housing
starting at the center of the handlebar.
Make sure that the cable housing
does not go through the compression
column, but through the space in front
of the compression column (see image
A, page 16).
5.4 Install the rear brake cable housing
starting under the bottom bracket shell.
See the table below for the cable housing
length suggested.
5.1
15