Table of Contents
Advertisement
Models 225773, 225827, 240883, 240884,
and 245695 (Fig. 2)
1. Models 225773, 240883, and 245695 only:
Assemble the truck as shown in the parts drawing
on page 14. Secure the truck pail (5) to the truck
base with the pointed hold-down clamps (3c) and
thumbnuts (3d).
2. Models 225827 and 240884 only:
Remove the fluid outlet adapter included with the
pump, and screw the holster (6) into the pump
outlet, using thread sealant.
3. Remove the cover from the pail of lubricant. Place
the pail of lubricant into the truck pail.
4. Secure the cover (4) on the pail with the three
thumbscrews (A).
5. Insert the pump riser tube through the top of the
cover (4). Lower the pump until it rests on the
cover.
6. Assemble the gun (2b) and hose (2a), and
connect the hose to the pump fluid outlet.
7. Connect the nipple (2d) to the pump air inlet or air
regulator (7b) inlet, whichever is applicable.
Connect the quick-disconnect coupler (2c) to the
air supply hose.
6
307878
Installation
2b
4
5
Fig. 2
7b
2c,
2d
3c, 3d
Model 240883 shown
2a
6
A
01514A
Advertisement
Table of Contents
