Keysight Technologies B2960A Demo Manual page 7

07 | Keysight | Using an External Trigger to Generate Pulses with the B2960A – Demo Guide
to select the Source trigger source and press
4) Rotate
5) Press to change the keys shown in Assist keys, and then press
Source trigger source to EXT9.
6) If you aren't on the top of the Function menu, press
top level.
On the top level of the Function menu
In the middle level of the Function menu
7) Press ,
Configuration dialogue.
8) Press to edit the Digital I/O pin number.
No tree structure can be seen
Some tree structure can be seen
, , and then press
to edit it.
to set the
repeatedly to return to the
to open the DIO
(1) Press More...
(2) Press I/O
(3) Press DIO
(4) Press Config