Advertisement
08 | Keysight | Using an External Trigger to Generate Pulses with the B2960A – Demo Guide
9) Press
repeatedly until
to specify the Digital I/O pin number, the properties of which are configured.
10) Rotate
to select the Input/output function and press
press
to set it to Trigger input
11) Rotate
to select the Polarity and press
set it to Positive polarity.
12) Press
to save your settings.
13) Rotate
to select the Source trigger count and press
enter the Number of trigger signals which will be sent to the instrument as the
Source trigger count.
appears in the Assist keys and then select
to edit it. Then press
to edit it. Then
to
to edit it. Then
Advertisement
