Advertisement
10 | Keysight | Using an External Trigger to Generate Pulses with the B2960A – Demo Guide
4) Press
to save your settings.
5. Initiate the channel to wait for an external trigger signal
1) If you aren't on the top of the Function menu, press
the top level.
On the top level of the Function menu
In the middle level of the Function menu
2) Press
,
be ready to receive an external trigger signal.
Now, the B2960A series is ready to receive an external trigger signal. Send the external
trigger signal to the B2960A series to generate a pulsed signal.
Actual Output Example
200 μs
No tree structure can be seen
Some tree structure can be seen
,
, and then press
2 V
Output from Ch1
External Trigger Signal
repeatedly to return to
to make the channel 1
(1) Press Trigger
(2) Press Initiate
(3) Press Trans.
(4) Press Ch 1
Advertisement
