Toshiba Schneider Inverter Corporation - Toshiba TOSVERT VF-nC1 Instruction Manual

【Accessories for countermeasure】
- Shielded cable
- Shielded cable
- EMI filter
- Ferrite core 1
【Apply if needed】
- Grounding plate
- Ferrite core
- Zero-phase reactor
- Radio noise filter
9.1.4 Low voltage directive
Inverter itself is an object of the CE marking.
The Low Voltage Directive defines the safety of the electric equipment. VF-NC1 series conform to
the Low Voltage directive based on EN50178.
Normative standard
Pollution degree
Over-voltage category : 3
EN50178 provides that for electronic equipment used in power installations. The main intention is to
stipulate minimum requirements for the design and manufacture of electronic equipment, for
protection against electric shock, for testing and for the integration into systems for power
installations.
: Showa electric Wire & Cable Co. LTD.
Type form/ CV-S, 600V or less
: SUMITOMO 3M Co. Ltd. Electro-magnetic guard shielded sleeve
Type form/ DS-5,7,10,14

: Toshiba Schneider Inverter Corporation

Type form/ For further details, see Table2
: TDK Co. Ltd.
Type form/ ZCAT3035-1330
: Toshiba Schneider Inverter Corporation
Type form/ EMP001Z
: NEC TOKIN Corporation
Type form/ ESD-R-47D-1
: Soshin denki Co. Ltd.
Type form/ RC5078 or RC9129
: Soshin denki Co. Ltd.
Type form/ NF series
: EN50178/Electronic equipment for use in power installation
: 2(5.2.15.2)
200V class 3.0 mm (5.2.16.1)
I-5
E6581090
9