Bluetooth Module - Toshiba PORTEGE M400 Maintenance Manual

4.9 Bluetooth module

4.9

Bluetooth module

Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below. (See Figure 4-16.)
CAUTION: Do not try to remove the Bluetooth module with the computer turned on.
You can damage the computer or Bluetooth module. Do not touch the
connectors on the Bluetooth module on the computer. Debris on the
connectors may cause Bluetooth access problems.
1. Peel off the insulator and spacer.
2. Disconnect the Bluetooth antenna cable from the Bluetooth module using an
antenna coaxial cable disconnector.
3. Disconnect the Bluetooth cable from the connector CN4400 on the system board.
4. Remove the Bluetooth module from the slot and disconnect the Bluetooth cable
from the connector on the Bluetooth module.
Bluetooth antenna cable
PORTEGE M400 Maintenance Manual (960-541)
Spacer
Bluetooth module
Figure4-16 Removing the Bluetooth module
4 Replacement Procedures
Insulator
Bluetooth cable
[CONFIDENTIAL]
CN4400
4-27