4 Replacement Procedures
4.30 Hinge assembly
Removing the Hinge assembly
The following describes the procedure for removing the hinge assembly. (See Figure 4-51
and 4-52.)
1. Remove the following screw and Harness holder.
• M2.5×6.0B
2. Remove the following screws and LCD harness earth spring.
• M2.5×6.0B
3. Remove the following screw, antenna cover S and antenna cover T from the slot.
• M2.0×6.0S
M2.0×6.0S
S-THIN HEAD
Antenna cover S
Antenna cover T
4-78
FLAT HEAD screw
FLAT HEAD screw
S-THIN HEAD screw
M2.5×6.0B
FLAT HEAD
Figure 4-51 Removing the hinge assembly (1)
[CONFIDENTIAL]
×1
×1
×1
M2.5×6.0B
FLAT HEAD
PORTEGE M400 Maintenance Manual (960-541)
4.30 Hinge assembly
Harness holder
M2.5×6.0B
FLAT HEAD
LCD harness
earth spring
Hinge
assembly