Operations - Toshiba PORTEGE M400 Maintenance Manual

3 Tests and Diagnostics

3.23.2 Operations

1. Select 5 and press Enter in the DIAGNOSTIC MENU, the error information is
displayed in the following format:
XXXXX ERRORS
CNT TS-NO PASS STS
001 FDD 02
001 FDD 01
Pass count
Subtest number
Test name
Error count
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
2. The error information displayed on the screen can be manipulated by the following
number keys:
The 1 key scrolls the display to the next page.
The 2 key scrolls the display to the previous page.
The 3 key returns to the Diagnostic Menu.
The 4 key erases all error log information in RAM.
The 5 key outputs the error log information to a printer.
The 6 key reads the log information from a floppy disk.
The 7 key writes the log information to a floppy disk.
3. In the case of "error retry OK," a capital "R" will be placed at the beginning of the
error status. However, it is not added to the error count.
3-58 [CONFIDENTIAL]
ADDR
0000 103 00001 00 00 0000 FDD-WRITE PROTECTED
0000 180 00001 00 00 0000 FDD-TIME OUT ERROR
Address
Error status
Write data
WD RD HSTS [ERROR STATUS NAME]
HDC status
Read data
PORTEGE M400 Maintenance Manual (960-541)
3.23 Log Utilities
Error status name