Toshiba PORTEGE M400 Maintenance Manual page 257

4.6 Slim select bay module
Installing the slim select bay module
The following describes the procedure for installing the slim select bay module. (See Figure
4-8 and 4-9.)
1. Install the ODD side assembly to the optical drive assembly and secure it with the
following screws.
• M2.0×6.0S
• M2.0×22.0S
2. Install the connector base to the optical drive assembly and secure it with the
following screw.
• M2.0×3.0S
3. Install the connector cover and connector to the optical drive assembly and secure it
with the following screws.
• M2.0×6.0S
4. Insert the slim select bay module into the computer to connect it to the connector on
the system board. Press to ensure a firm connection.
5. Remove the following screw from the screw hole. Then secure the latch with the
removed screw. (The slim select bay is locked.)
• M2.0×4.0B
PORTEGE M400 Maintenance Manual (960-541)
BIND screw
BIND screw
S-THIN HEAD screw
BIND screw
BIND screw
4 Replacement Procedures
×1
×1
×1
×2
×1
[CONFIDENTIAL] 4-19