Toshiba PORTEGE M400 Maintenance Manual page 131

3.3 Check of the RAID configuration
3.3.3.2 RAID : not OPTIMAL
ABSENT or OFFLINE is displayed
When the "ABSENT" or "OFFLINE" is displayed as shown below, the drive is
removed by the RAID console and installed again. When the drive is unlocked,
"ABSENT" is displayed. When the drive is locked, "OFFLINE" is displayed.
Repair is not needed in this case.
TOSHIBA RAID / RAID Information Display Rev xx.xx.xxxx
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
LD0 RAID-1
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Port Assign
0 LD0-0 ONLINE
1 LD0-1 ABSENT
< RAID: not OPTIMAL >
PORTEGE M400 Maintenance Manual (960-541)
Status Capacity
DEGRADE xxGB
: Enable
: Yes
: Disable
: Enable
Status Size Model
xxGB FUJITSU----------
xxGB FUJITSU----------
3 Tests and Diagnostics
Rev
xxxxxxx
xxxxxxx
[CONFIDENTIAL] 3-13