Cd Sound (Standard) - Toshiba PORTEGE M400 Maintenance Manual

3.30 Sound Test program

3.30.3 CD Sound (Standard)

To execute the CD Sound (Standard) test, press 3 and Enter. Insert the test media
(TOSHIBA TEST CD-ROM or ABEX TEST CD-ROM) or music CD on the market (if the
test media can not be prepared). Following menu appears in the display.
For details on use of test media, refer to (1) Test media (Toshiba-made test media).
For details on use of audio CD on the market, refer to (2) Audio CD.
(1) Test media (Toshiba-made test media)
CD/DVD TEST
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
01 – Japanese Narration
02 – English Narration
03 – Test Tone A (100Hz – 20Hz)
04 - Test Tone B (400Hz – 3KHz L-R)
Subtest01 Japanese Narration
Selected this subtest, narration in Japanese starts and following message
appears in the display.
Play start CD sound !
Press any key <Play stop>.
Press any key and stop the narration. Then return to the CD Sound (Standard)
test menu.
PORTEGE M400 Maintenance Manual (960-541)
IN PROGRESS XXXXXXXX
ERROR COUNT: XXXXX
READ DATA
STATUS
Drive # = 0, ATAPI status =00
Command = XX
[[Block address = XXXXXXXX]]
[[Block length
Final : Block address = XXXXXXXXX
3 Tests and Diagnostics
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] : test end
[Ctrl]+[C]
: XX
: XXX
= XXXXXXXX]]
[CONFIDENTIAL]
: key stop
3-93