Download Print this page

Toshiba PORTEGE M400 Maintenance Manual page 273

Toshiba personal computer
Hide thumbs Also See for PORTEGE M400:

Advertisement

4.11 Touch pad
Installing the Touch pad
The following describes the procedure for installing the touch pad. (See Figure 4-18 to 4-21.)
1. Connect the touch pad cable to the connector on the touch pad and stick the glass
tape.
2. Install the touch pad assembly to the slot and secure it with the following screws.
• M2.0×3.0S
3. Connect the touch pad cable to the connector CN3240 on the system board.
4. Install the touch pad cover while engaging latches.
5. Close the display and turn over the computer.
6. Secure the following screw to fix the touch pad.
• M2.5×10.0B
PORTEGE M400 Maintenance Manual (960-541)
S-THIN HEAD screw
FLAT HEAD screw
4 Replacement Procedures
×2
×1
[CONFIDENTIAL]
4-35

Advertisement

loading