Table of Contents
Advertisement
Using the telephone
Dial a telephone number
The telephone mode must be switched on.
Always use the area code for the number
you are dialling, even if it is a local number.
Manual dialling
•
Dial the number using the number
keys.
The number you enter will appear in the dis-
play.
Correct the number
To delete a digit:
•
Select the digit you wish to correct us-
ing the rocker switch << / >> (digit will
flash).
•
Press CL briefly and enter the correct
digit.
To delete an entire number:
•
Press CL for approx. 1 second.
To start dialling/end call:
•
Press
or CL.
... from the list of parties called last
It is possible to display a list of the last ten
parties called using the SIM card.
You can call these numbers again without
having to enter them.
•
Press
when the network operator
(e.g. D1, D2) appears in the display.
A list of the last ten calls will appear in the
display.
•
Press
/
to select the party you wish
to call and press
twice.
The call will be placed automatically.
Note
If you want to call a party whose number
differs only slightly from one on the list:
•
Press
/
to select a party from the
list and press OK.
The telephone number will appear in the
display.
•
Press << / >> to select the digit you
want to alter (it will flash).
•
Press CL briefly and enter the correct
digit.
•
Press
.
The call will be placed automatically.
Using the speed-dial . . .
You can recall telephone numbers from the
memory with the corresponding name or the
number of the entry.
The numbers which can be recalled in the
telephone's memory bank range from 1 to
25, on the SIM card from 101 to a maximum
of 225.
It is possible to use one-touch dialling for
the first nine telephone numbers in the ba-
sic telephone menu by pressing the corre-
sponding number key directly.
. . . directly from the phone memory
bank:
•
Press the corresponding key (1 to 9)
for approx. 2 seconds until you hear a
beep.
The call will be placed automatically.
. . . directly from the SIM card memory
bank:
•
Press
*
and the corresponding key (1
to 9) for approx. 2 seconds until you
hear a beep.
The call will be placed automatically.
105
Advertisement
Table of Contents
