Table of Contents
Advertisement
Quick reference
for radio and CD changer (optional) operation
Alter the volume
Turn the knob to alter the volume. The
setting selected will appear in the dis-
play.
When the Radiophone is switched on,
it will play at a preset volume (VOL-
UME FIX).
VOLUME FIX can be altered as de-
sired (refer to "Programming with DSC
– VOLUME FIX").
The volume can also be altered using
the remote control (optional) by press-
ing V- / V+.
2
/ AUD
Press AUD once:
Alter treble and bass settings using the
rocker switch.
Treble +
Treble –
Bass –
Bass +
80
Press AUD twice:
Alter balance (left/right) and fader
(front/rear) settings.
Fader front
Fader rear
Balance left
Balance right
The settings selected will be indicated
in the display. The last setting made
will be stored automatically.
Switch off AUD: Press AUD a third
time.
If no changes are made within 4 sec-
onds, the AUD setting will end auto-
matically.
Switch Loudness on/off:
Press AUD for approx. 1 second. (You
will hear a beep.)
The current setting will appear briefly
in the display (ON/OFF).
For more detailed information refer to
"Programming with DSC – LOUD-
NESS".
3 SRC (Source)
You can switch between the operating
modes for the radio and CD changer
(optional) or AUX.
Switch back from the telephone menu
to the audio source last heard.
Note: This will not function while you
are using the telephone or when you
are trying to place a call.
4 TA (Traffic Announcement = priority
for traffic messages)
If "TA" appears in the display, you will
be able to tune into radio stations
which broadcast traffic information
only.
Switch priority on/off: press TA.
5 TS / BND
Switch between the memory levels/
wavebands FM, TS (Travelstore), MW
and LW.
Additional Travelstore function
Store the nine radio stations with the
strongest reception signals using Trav-
elstore:
Press BND until you hear a beep or
until "TRAVELSTORE" appears in the
display.
Advertisement
Table of Contents
