Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Blaupunkt MNCHEN RDM 169 US RDM 169 US
Summary of Contents for Blaupunkt MNCHEN RDM 169 US RDM 169 US
- Page 1 Radio / CD München RDM 169 US Operating instructions...
-
Page 3: Table Of Contents
Contents Condensed instructions ... 4 Remote control RC 08 ... 11 Important ... 12 Read the following before using the unit ... 12 Traffic safety ... 12 Installation ... 12 Telephone mute ... 12 Accessories ... 12 Guarantee ... 12 International hotline ... -
Page 4: Condensed Instructions
Condensed instructions 1 Disengaging the fold-down control panel Disengage the control panel to insert or remove the KeyCard and CD. To disengage the control panel, press knob 1: the control panel folds down. The control panel cannot be removed, nor should it be used a shelf. To re-engage the control panel, push it back into its original position (Arrow 3). - Page 5 Condensed instructions 3 Adjusting the volume Turn the knob to adjust the volume. The selected value is shown on the display. When switched on, the unit plays at the preselected volume (ON VOL). ON VOL can be changed (refer to “Programming with DSC –...
- Page 6 Condensed instructions Press SCA for approx. 1 second (Pre- set Scan) – a beep sounds, “SCAN” appears in the display alternately with the code of the sampled station. The stations stored on the station keys and which can be received are sam- pled briefly.
- Page 7 Condensed instructions SCA - Scan For sampling the tracks briefly (in CD changer mode, the tracks of all CDs). Starting Scan: Press SCA. The tracks are sampled briefly in turn in ascending order. The sampling time can be adjusted. (Refer to “Programming with DSC – SCANTIME”.) Ending Scan: Press SCA.
- Page 8 Condensed instructions CD and CD changer mode << / >> Select CD (changer mode only) >> Up: Press briefly << Down: Press briefly Select track Up: Press briefly CUE - fast forward (audible): Keep depressed Down: Press twice or more in quick succession Replay track from beginning: Press briefly...
- Page 9 Condensed instructions 9 DIS Selecting various display modes. Radio mode Press DIS briefly: - Name of the selected station - Currently selected frequency - PTY code A condition is that an RDS station can be received with an adequate field strength.
- Page 10 Condensed instructions ; CDC Switch to changer mode (only if a changer is fitted). If a changer is not fitted, AUX is selec- ted. Condition: AUX ON must be se- lected in the DSC menu. < CD Switch to CD mode = TU (TUNER) For switching to the radio mode, for toggling between FMI, FM II, TS (Trav-...
-
Page 11: Remote Control Rc 08
Remote control RC 08 B V- / V+ Adjust the volume C SRC (Source) Select the operating mode - Radio - CD - Changer mode (if a changer is con- nected) D Keys <</>>, Radio mode Station seek Down <</>> Up/down in steps (on FM only when AF is deactivated) FM only: <</>>... -
Page 12: Important
“PHONE” then appears on the display. Accessories Only use accessories and spare parts ap- proved by Blaupunkt. The following Blaupunkt products can be used with this unit: Remote control RC 08 The RC 08 infrared remote- control permits operation of the chief functions from the steering wheel. -
Page 13: Keycard Anti-Theft Protection System
KeyCard anti-theft protection system Two KeyCards are supplied with the unit. Should you lose or damage a KeyCard, you can obtain a replacement from a specialist dealer. If you are using two KeyCards, the settings are taken from the first KeyCard. You can customize the following functions: Station key assignment, bass, treble, bal- ance and fader settings, loudness, beep... -
Page 14: Displaying The Radio Passport Data
KeyCard anti-theft protection system The unit is now also ready for operation with the new KeyCard. A maximum of two KeyCards can be taught If a third KeyCard is taught in, the card which is not employed for the teaching-in process of the new card automatically loses its va- lidity. -
Page 15: Selecting The Operating Mode
CD mode can be selected only if a CD is inserted. CDC can be selected only if a Blaupunkt A 06, A 072, A 08 or A 05, A 071 or IDC A 09 CD changer is connected and a magazine containing at least one CD is inserted. -
Page 16: Radio Operation With Rds
Radio operation with RDS (Radio Data System) The Radio Data System provides FM recep- tion with enhanced convenience. An increasing number of radio stations now broadcast RDS information supplementary to the program proper. As soon as stations can be recognized, the station code appears, in some cases with indication of the region, e.g. -
Page 17: Station Tuning
Radio operation with RDS (Radio Data System) Station tuning Station seek • Press / : the radio automatically looks for the next station. is held down at the top or bottom, the seek run continues forwards or backwards at higher speed. Station seek Down <<... -
Page 18: Automatically Saving The Strongest Station With Travelstore
Radio operation with RDS (Radio Data System) Note: Should you store a station which has already been stored, the corresponding station key and the memory level flash briefly if a differ- ent memory level is called up. Automatically saving the stron- gest station with Travelstore You can store the six strongest FM and AM stations in the current reception region au-... -
Page 19: Sampling Stations With Radio Scan
Radio operation with RDS (Radio Data System) Sampling stations with Radio Scan You can sample briefly the stations which can be received on the selected frequency band. Radio Scan can be started only when PTY is deactivated (“PTY” is not lit on the dis- play). -
Page 20: Pty - Program Type
Radio operation with RDS (Radio Data System) PTY – Program Type This is an RDS service which is being im- plemented progressively by the radio sta- tions. The service enables FM stations to be selected according to a specific program content. - Page 21 Radio operation with RDS (Radio Data System) b) With the seek run rocker << >> If PTY is activated, you can select a program type with << >>. • Press << or >>: the last program type selected is displayed for three seconds.
-
Page 22: Cd Mode/Cd Changer Mode
This unit enables you to play CDs. CDs can also be played with the aid of a Blaupunkt CDC A 06, A 072, A 08, A 05, A 071 or IDC A 09 CD changer. These changers are available from your dealer. -
Page 23: Selecting The Display Type
CD mode/CD changer mode Selecting the display type You can switch the display type over in CD and changer replay mode: • Press DIS repeatedly until the desired display type is selected. “CD 10” – CD number (appears in changer mode only) “TRACK 13”... -
Page 24: Mix
CD mode/CD changer mode Storing tracks with TPM A track can be stored only whilst it is being played. To store: • Hold TPM down for approx. 1 second: “TPM PROG” appears on the display. This track has been stored. Activating/deactivating TPM replay •... -
Page 25: Scan
CD mode/CD changer mode SCAN For brief sampling of the CD tracks. Starting SCAN: • Press SCA briefly: “SCAN” appears on the display. The tracks are sampled briefly in turn in as- cending order. Ending SCAN: • Press SCA briefly. The last track selected continues playing. -
Page 26: Clock - Time
Clock - Time The unit has an internal clock which is set automatically through RDS for absolute ac- curacy. A condition for correction by RDS is that an RDS transmitter with CT function (CT = clock time) is being received. Automatic correction of the time can be de- activated. -
Page 27: Equalizer Setting
Equalizer setting The sound in the vehicle is influenced deci- sively by the acoustic characteristics of the passenger compartment, substantially more than by the characteristics of the loudspeak- ers. The position and installation of the loud- speakers and the volume to the rear, for ex- ample of the door or rear shelf, are howev- er also important. -
Page 28: Selecting A Quality Factor For The Bass Or Mid-Range
Equalizer setting Selecting a quality factor for the bass or mid-range • Press repeatedly until “LO-Q- FAC” or “HI-Q-FAC” appear in the dis- play. • Press << or >> once or several times in order to set the quality factor (Q- FACT 1 to Q-FACT 3). -
Page 29: Tips On Adjusting The Equalizer
Equalizer setting Tips on adjusting the equalizer Begin adjustment with the mid-range/treble and complete it with the bass range. Frequency ranges Tonal effect/problem Bass range 30 to 100 Hz Bass response too weak Lower mid-range 100 to 400 Hz Bass not clean Booming Unpleasant pressure on the ears Mid-range... -
Page 30: Programming With Dsc
Programming with DSC The car radio offers the facility to adjust cer- tain settings and functions to your require- ments and to store these changes with the aid of DSC (Direct Software Control). The default settings are selected at the fac- tory. - Page 31 Programming with DSC STEREO/MONO Toggle << >>. The display indicates the se- lected state briefly. STEREO is selected auto- matically when the unit is switched on. AMP DELAY Energization delay of exter- nal amplifiers. DLAY OFF signifies no energization de- lay.
-
Page 32: Overview Of The Factory Default Settings With Dsc
Programming with DSC UPDATE In CD and changer mode, this function enables the names of CDs to be deleted in order to create space for new CDs. (Refer to “Delet- ing CD names with DSC- UPDATE”.) TUNER Selecting the reception range for your country. -
Page 33: Glossary Of Technical Terms
EXIT Press the key briefly to terminate or abort the adjustment process. KeyCard Blaupunkt’s anti-theft protection system. The unit can be operated only with the correct KeyCard. Play CDs/CD tracks in random order. Preset Scan See SCAN. - Page 34 Glossar - Fachwortverzeichnis SCAN For brief sampling of the radio stations which can be received, or of the tracks in CD mode. The stored radio stations can be sampled with Preset Scan. Softkey (Software key) Key with variable function. SRC – Source Toggles the source between radio and CD changer.
- Page 35 Blaupunkt-Werke GmbH Bosch Gruppe 08/99 Sc K7/VKD 8 622 402 096...