Table of Contents
Advertisement
Programming with DSC – Call Menu
Enter data for call barring
Each type of call barring has the same
processing list for speech, data and fax:
– "Status"
Press
/
to display the current selec-
tion: "not registered" if call barring has
not been activated or "registered" if
call barring has been activated.
– "Activate"
• Enter the password and press OK.
Call barring will be switched on.
– "Deactivate"
• Enter the password and press OK.
Call barring will be switched off.
•
Press
/
to make your selection and
press OK.
126
Phone lock
You can prevent your telephone from being
used by unauthorised persons. If necessary,
•
Press
/
to select "Phone lock" and
press OK.
Call meters
Forwarding
Barring
Phone lock
"All" (dialling not possible)
Only emergency calls can be made
"Off" (no restrictions)
All locks are switched off.
"One-touch only"
You can only call the one-touch dialling tel-
ephone numbers stored on keys 1 to 9 and
the SIM card.
"Speed/one-touch only"
All of the telephone numbers stored (in the
phone and on the SIM card) can be dialled.
•
Press
/
to make your selection and
press OK.
•
Enter your access code and press OK.
•
Press
/
to switch the function on/off
and press OK.
User group
This is a special feature which you can or-
der from your network operator.
Using it, it is possible to limit the use of the
telephone to a certain group of users.
Call meters
Forwarding
Barring
Phone lock
User group
Important!
Do not alter any of these settings unless this
function has been activated by your network
operator.
Otherwise, this could cause malfunctioning.
Advertisement
Table of Contents
