Gude Expert Power Control NET 24x Manual page 9

Configuration - IP Address
Hostname
Enter the host name
of EPC NET 24x. EPC
NET 24x uses this name
to connect with DHCP
server.
Special signs may
destabilize your net-
work.
IP Address
Figure 5 Config - IP Address
Here you can change the IP address of EPC NET 24x.
Netmask
Here you can change the netmask of EPC NET 24x.
Gateway
Here you can change the standard gateway of EPC NET 24x.
Use DHCP
Here you can set, if EPC NET 24x shall get its TCP/IP settings
directly from your DHCP server. If DHCP is activated, EPC NET
24x proves if a DHCP server is active inside of your LAN. Then
EPC NET 24x requests TCP/IP settings from this server. If there
is no DHCP server inside of your network, we recommend to de-
activate this function.
Expert Power Control NET 24x 7