Configuration By Webinterface - Gude Expert Power Control NET 24x Manual

3.3 Configuration by Webinterface

Go to the website of EPC NET 24x. Enter the IP address of EPC
NET 24x into the address line of your internet browser:
http://IP address of EPC NET 24x/
Figure 3 Login
and press LOGIN.
To enter the configuration menu, click on „Configuration" on the
upper left side of the screen.
Configuration - Power Ports
Label
A name with a maximum
of 15 characters can be
entered here for each
Power Port.
After power-up switch
The Power Port's switch-
ing state after a power-on
of EPC NET 24x can be
defined here (on, off, re-
member last state).
Figure 4 Config - Power Ports
If switching on after power-up, wait ...
A switching delay of a Power Port can be defined here that is
applied after switch on of EPC NET 24x. The delay can last up
to 8191 seconds.
6
Expert Power Control NET 24x