Dear customer,
thank you for chosing a GUDE product.
All our devices are developed and
manufactured in Germany in order to meet
our customers' expectations towards reliable IT infra-
structure.
This quick start guide will enable you to start up your
device. More detailed information on operating it can be
found in the corresponding user manual. It is available at
gude.info/nc/support/downloads. For further questions,
please have a look at
gude.info/wiki
or feel free to contact
our service team.
1. Connect to the power supply
Connect your device to the power supply by plugging in the
existing connector to the power socket (i.e. power plug,
power cord or power supply unit). The status LED shines
constantly red.
2. Connect to the TCP/IP network
Connect your device to the network by plugging in the con-
nector cable to the Ethernet connector. The device searches
for a DHCP server and requests an available IP address.
Check in the DHCP server settings, which IP address has
been allocated. If necessary, make sure that the same IP
address will be assigned at every re-start. The status LED
shines shortly orange before it turnes constantly green.
Your device is now connected to the TCP/IP network and
ready for operation.
3. Set-up and using features
The webinterface is the central control panel of your
device (see Fig. 1). You can access it from any PC in the same
TCP/IP network.
By accessing the webinterface you can
• configure all device settings and
• use all features of your device (e.g. switching
power outlets or retrieving sensor values).
You can access the webinterface of your device as follows:
Open the web browser of a PC being in the same
network.
Enter the following into the address bar of your web
browser:
http://"device IP address"/
(default: 192.168.0.2)
Log in.
In case that your device can not be found at the address en-
tered, use our configuration programm GBL_Conf.
By using GBL_Conf you can
• see all IP capable GUDE products in your network,
• configure all network and security settings and
• restore to default settings.
4. Set-up by using the configuration program
The most current version of GBL_Conf can be found at
gude.info/nc/support/downloads. Download and open
the provided file and follow the onscreen instructions. Af-
ter successful installation, please follow these steps:
Open GBL_Conf. All found devices in the network will
now appear in the left window as shown in Fig. 2
(Abb. 2).
Double-click on the device name. You will be forwar-
ded automatically to the device's webinterface in
your web browser.
5. Firmware updates
We recommend to always run the most current firmwa-
re version on your device. It is available for download at
gude.info/nc/support/downloads. Detailed installation
guidelines can be found in the device's user manual.
6. Accessories
To get an overview of compatible accessories for your GUDE
device, please refer to the corresponding product page on
our website at
gude.info
and on our online web shop at
shop.gude.info.
Schnellstartanleitung /
Quick Start Guide
für / for
Expert Power Control
Expert PDU Energy
Expert Transfer Switch
Expert Net Control
Expert Sensor Box
EMC Professional
Need help?
Do you have a question about the Expert Power Control and is the answer not in the manual?
Questions and answers