Gude Expert Power Control NET 24x Manual page 13

Configuration - SNMP Trap Receiver List
Enable Traps
Here you can activate
SNMP-traps.
bled, EPC NET 24x will
dispatch SNMP-traps
to all receivers
Receivers have to be
listed as follows: IP ad-
dress (and, if necessary
the HTTP port) e.g.:
192.168.0.223:8000
Trap Version
Here you can choose
between SNMP-traps
standard 1 and 2c.
Use SNMP only if your network is fitted for.
More information about the SNMP functions of EPC NET 24x,
you can find in chapter 3.5, on http://www.gude.info/wiki or ask
our support team.
if ena-
listed.
Figure 9 Config - SNMP Traps
Expert Power Control NET 24x 11