Table of Contents
Advertisement
Configuration - Syslog
Use Syslog
Here you can activate Syslog
of EPC NET 24x.
Syslog Server IP
If syslog is active enter here
the IP address of you Syslog
server.
Figure 10 Config - Syslog
Syslog Port
If syslog is active enter here the port number, that your Syslog
server uses to receive syslog information.
More information about Syslog you can find in chapter 3.6, on
http://www.gude.info/wiki or ask our support team.
3.4 IP Access Control List
IP Access Control List (IP ACL) acts as an IP filter for your EPC
NET 24x. Wether it is active hosts and subnets only can contact
EPC NET 24x, if their IP adresses are stated in this IP ACL.
e.g.: http://192.168.0.1 or http://192.168.0.1/24
If you locked yourself out by mistake, please activate the boot-
loader mode of EPC NET 24x, start Gbl_Conf.exe and deacti-
vate IP ACL.
You can find more information about configuration of IP ACL in
chapter 3.3 or have a look at http://www.gude.info/wiki.
12
Expert Power Control NET 24x
Advertisement
Table of Contents
Need help?
Do you have a question about the Expert Power Control NET 24x and is the answer not in the manual?
Questions and answers