5.2
About Installing cable connectors
Stripping the cable
l
Testing stripped cable for electrical shorts and continuity
l
Attaching connectors to the cable
l
Testing finished cables
l
5.2.1
Stripping the cable
CAUTION
When cutting cable sections, make them long enough to route from one tap to the next with
sufficient slack so that the bend radius does not exceed the defined requirements. See
external to enclosures
1. Verify that you have the proper memory-blade holder installed for the type of cable you are using
(PVC-CL2 or FEP-CL2P). Refer to
change the memory-blade holder.
in this Guide for more information.
Changing the memory-blade holder
Chapter 5 - Building ControlNet Trunk Cables
in this Guide, if you need to
- 31 -
Wiring