Honeywell EXPERION PKS Installation Manual page 56

displays and troubleshooting), check the tap drop-cable for a label indicating the
attached segment before making your connection.
1. Remove and save the dust cap located on the straight or right-angle connector of the designated
tap on the first segment (Segment 1).
2. Remove and discard the dust caps from the repeater BNC jacks.
3. Connect the designated tap drop-cable's straight or right-angle connector to the BNC connector on
the repeater labeled as 1.
4. Remove (and save) the dust cap located on the straight or right-angle connector of the designated
tap on the second segment (segment 2).
Chapter 7 - ControlNet Cable Installation
- 56 -