Changing The Memory-Blade Holder - Honeywell EXPERION PKS Installation Manual

Chapter 5 - Building ControlNet Trunk Cables
5.1.6

Changing the memory-blade holder

You received two memory-blade holders with your cable strip tool; one is for standard PVC-CL2 cable,
and the other is for plenum FEP-CL2P cable. You need to install the appropriate memory-blade holder
for the types of cable you are stripping (PVC or FEP).
1. Lift the latches on the memory-blade holder, and swing back the holder.
2. Snap the memory-blade holder off the rod, and remove it from the strip tool.
3. Position the appropriate memory-blade holder on the rod and snap the holder into place.
4. Swing the memory-blade holder closed.
- 30 -