Siemens SIMOVERT MV Series Commissioning Instructions page 103

V23 input value = 10
V24 actual value = control word 2 of the Profibus interface to the drive converter
Checkback signal, transformer ready (a log. 1
Checkback signal, transformer alarm (a log. 1
Checkback signal, transformer fault (a log. 1
Checkback signal, motor ready (a log. 1
Checkback signal, motor alarm (a log. 1
Checkback signal, motor fault (a log.
Checkback signal, cooling unit ready (a log. 1
Checkback signal, cooling unit alarm (a log. 1
Checkback signal, cooling unit fault (a log.
External alarm (a log. 1
Checkback signal, circuit-breaker OPEN (a log. 1
Safety circuit violated (a log.1
Select, fixed setpoint bit 1 (a log. 1
Select, fixed setpoint bit 2 (a log 1
Speed/torque control selection (a log 1
Still not assigned
V23 input value = 11
V24 actual value = IT41 binary inputs; inputs 1 to 16
Command, drive converter ON; BE1; X100:33A; X100:33B
Command, OFF1; BE2; X100:34A; X100:34B
Command, OFF2: BE3; X100:35A; X100:35B
Command, inverter enable; BE4; X100:36A; X100:36B
Command, RFG enable; BE5; X100:37A; X100:37B
Command, RFG hold; BE6; X100:38A; X100:38B
Command, setpoint enable; BE7; X100:39A; X100:39B
Command, acknowledge; BE8; X100:40A; X100:40B
Parameterizable input; BE9; X100:41A
Parameterizable input; BE10; X100:42A; X100:42B
Parameterizable input; BE11; X100:43A; X100:43B
Parameterizable input; BE12; X100:44A; X100:44B
Checkback signal auxiliaries ON; BE13; X100:45A; X100:45B
Command, basic/standby changeover (key-actuated switch "Remote"/"Local";
BE14; A122.X2:6; A122.X2:56
Command, OFF1 from the door-mounted pushbutton;
BE15; A122.X2:7; A122.X2:57
Command, ON from the door-mounted pushbutton; BE16; A122.X2:8; A122.X2:58
Siemens AG 6SE8004-0BH76
SIMOVERT MV Commissioning Instructions
ready)
alarm)
fault)
ready)
alarm)
fault)
ready)
alarm)
fault)
alarm)
safety shutdown)
selection)
selection)
speed control)
circuit-breaker is OPEN)
103