Changing Of The Password; Touch Calibration / Touch Test; Language; Network Configuration - Dräger RVP 5000 Technical Handbook

Display for connection to dräger regard
Hide thumbs Also See for RVP 5000:
Table of Contents

Advertisement

Available languages

Available languages

Setup menu
8.2

Changing of the password

The passwords for the users Configurator and Administrator
can be changed. Touch on the "System Time/User
Management" button to open a new window. The opening
screen shows a area for the user management. To change the
password the user has to be logged in as configurator or
administrator. The configurator can change the configurator
password, the administrator can change the administrator
password. There are also the users operator and developer
visible. The passwords for these users are blocked and cannot
be changed.
NOTICE
i
i
Only the passwords for the actual user (Configurator/
Administrator) can be changed.
8.3

Touch calibration / Touch test

Touch setting
The Touch setting function is
used for calibration of the
Touch screens. The touch
screen will be set by pressing
on the squares.
Touch test
The setting of the touch area
will be review by pressing the
touch screen.
To leave the test or calibration function press the "Menu"
button below the screen.
8.4

Language

A pop-up window will open when the 'Language' button is
pressed. Here, the language can be selected by pressing the
corresponding national flag.
30
8.5

Network configuration

The
network
configuration
allows the configuration of a
specific IP address and shows
the IP address, mask and
gateway
of
the
unit.
touching into the address,
mask or gateway field a pop-up
keyboard offers the possibility
to set an individual address.
The
changes
must
confirmed by pressing the "SET
NETCONFIG" after inputting
data.
It displays a new screen with a
prompt to restart the display.
.
Confirmation will be shown after pressing the "Restart Display"
button and the display will be restarted.
After restarting the changes are activated.
8.6
Plant description / Adjustment of Modbus
card (optional) / Import of REGARD Sys-
tem configuration
Plant description:
This function is used to add a name to the connected REGARD
systems. By touching the blue field a keyboard opens to allow
an input.
By
be
Dräger RVP 5000

Advertisement

Chapters

Table of Contents
loading

Table of Contents