Intended Use; Product Features; Operating And Display Elements - Dräger RVP 5000 Technical Handbook

2

Intended use

The Dräger RVP 5000 is a display for the visualisation of gas
concentrations of up to 99 channels from a Dräger REGARD
system.
DANGER
!
Danger of explosion!
The Dräger RVP 5000 is not designed or authorised for
use in areas where flammable or explosive gas
mixtures could develop.
2.1

Product features

8,4" TFT Display
24 V DC power supply
Touch-Screen
RS485 communication interface to the Dräger REGARD
Control System
CompactFlash port
Optional datalogger
Optional web interface via Ethernet port
Up to a maximum of 99 channels can be managed
Display of measured values
Display of alarms / alarm window
Tabular or bar display
Simple controller configuration
Display of gas type, unit and customer-specific TAG names
Graphical trend display (up to 17 minutes)
Acoustic and visual alarm
Visualisation in the event of an alarm and fault
Possible update of the firmware via CompactFlash memory
card
Dräger RVP 5000
3

Operating and display elements

1
1 Menu button This button takes you to the start screen.
2 LEDs
Red (PWR):
Flashing Equipment started, no configuration loaded.
Continuous CompactFlash memory card available.
Yellow:
Off No CompactFlash memory card available.
Continuous CompactFlash memory card available.
Rapid CompactFlash memory card is being
flashing checked.
Equipment
CompactFlash memory card.
Flashing Incorrect
formatted.
Green:
Flashing At least one channel is active in the alarm
window.
Continuous Configuration is loaded and there are no
alarms pending.
Intended use
is writing data to
CompactFlash memory
2
03233194_en.eps
the
card
23