Front Panel Connectors (Jfp1/Jfp2); Atx Soft Power S; Reset (Jfp1/Reset); Hdd Led (Jfp1/Hddled) - Advantech AIMB-506 User Manual

2.9

Front Panel Connectors (JFP1/JFP2)

There are several headers for monitoring and controlling AIMB-506
2.9.1 ATX Soft Power Switch (JFP1/PWR_SW)
If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to (JFP1/ PWR_SW), for convenient
power on and off.
2.9.2

Reset (JFP1/RESET)

Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.9.3

HDD LED (JFP1/HDDLED)

You can connect an LED to connector (JFP1/HDDLED) to indicate when the HDD is
active.
2.9.4

External Speaker (JFP1/SPEAKER)

JFP2/SPEAKER is a 4-pin connector for an external speaker. If there is no external
speaker, the AIMB-506 provides an onboard buzzer as an alternative. To enable the
buzzer, set pins 7 & 10 as closed.
AIMB-506 User Manual 22