Front Panel Connectors (Jfp1+Jfp2); Atx Soft Power Switch (Jfp1/Pwr_Sw); Reset (Jfp1/Reset); Hdd Led (Jfp1/Hddled) - Advantech AIMB-242 User Manual

2.8

Front Panel Connectors (JFP1+JFP2)

There are several headers for monitoring and controlling the AIMB-242.
2.8.1

ATX soft power switch (JFP1/PWR_SW)

If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to (JFP1/ PWR_SW), for convenient
power on and off.
2.8.2

Reset (JFP1/RESET)

Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.8.3

HDD LED (JFP1/HDDLED)

You can connect an LED to connector (JFP1/HDDLED) to indicate when the HDD is
active.
2.8.4

External speaker (JFP1/SPEAKER)

JFP2/SPEAKER is a 4-pin connector for an external speaker. If there is no external
speaker, the AIMB-242 provides an onboard buzzer as an alternative. To enable the
buzzer, set pins 7 & 10 as closed.
19 AIMB-242 User Manual