Introduction; Usb Ports (Lan1_Usb12/ Lan2_Usb34/ Usb5678/ Usb9101112/ Usb13141516/ Usb17181920) - Advantech AIMB-506 User Manual

2.1

Introduction

You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed or have a packed
chassis, you may need to partially remove the card to make all the connections.
2.2 USB Ports (LAN1_USB12/ LAN2_USB34/
USB5678/ USB9101112/ USB13141516/
USB17181920)
The AIMB-506 provides up to 20 USB ports. The USB interface complies with USB
Specification Rev 2.0 supporting transmission rates up to 480 Mbps and Rev 3.0 sup-
ports transmission rates up to 5 Gbps and is fuse protected. The USB interface can
be disabled in the system BIOS setup.
The AIMB-506 is equipped with two high-performance 1000 Mbps Ethernet LAN
adapters, both of which are supported by all major network operating systems. The
RJ-45 jacks on the rear panel provide convenient LAN connection.
Table 2.1: LAN LED Indicator
LAN Mode
LAN1 Indicator
LAN2 Indicator
AIMB-506 User Manual
LAN Indicator
LED1 (Right) off for mal-link; Link (On) / Active (Flash)
LED2 (Left) 100 Mbps (On) / 10 Mbps (Off); Color: Orange
LED2 (Left) 1000 Mbps (On); Color: Green
LED1 (Right) off for mal-link; Link (On) / Active (Flash)
LED2 (Left) 100 Mbps (On) / 10 Mbps (Off); Color: Orange
LED2 (Left) 1000 Mbps (On); Color: Green
16