1.8.8
JCASEOP_SW1: Case Open Selection Pin Header
Table 1.8: JCASEOP_SW1: Case Open Selection Pin Header
Closed Pins
1-2
2-3*
Default
*
1.8.9
JSETCOM1_V1/JSETCOM2_V2: COM1/COM2_RI# Pin RI# / 5V
/ 12V
Jumper position for RI# (Default)
Jumper position for +5V
Jumper position for +12V
1.9
System Memory
AIMB-506 has four 288-pin memory sockets for 2666 MHz memory modules with
maximum capacity of 64 GB (Maximum 32 GB for each DIMM).
1.10
Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
"open" position, i.e., the handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket. Then firmly but gently (avoid pushing
down too hard) press the DIMM module well down into the socket, until you hear a
click when the two handles have automatically locked the memory module into the
correct position of the DIMM socket. To remove the memory module, just push both
handles outward, and the memory module will be ejected by the mechanism.
AIMB-506 User Manual
Result
Normal Mode
Normal Open (Default)
1
Normal Close
1-2 closed
12
1
Normal Open (Default)
2-3 closed