Clamp modules
001-1BA20 - 4xDC 24V and 4xDC 0V clamps
4.3 001-1BA20 - 4xDC 24V and 4xDC 0V clamps
Properties
Structure
54
This clamp module is a "potential distributor module". The DC 24V respectively ground
GND of the power section supply may be accessed by 4 clamp connectors each of the
terminal. The backplane bus is looped through the module. So this module has no
module ID, but influences the maximum number of modules to be connected.
n
4 clamp connectors DC 24V power section supply
n
4 clamp connectors ground GND power section supply.
n
Clamp current max. 10A
n
Backplane bus looped through
n
Isolation 500Veff (field voltage to the bus)
1
Locking lever terminal module
2
Backplane bus
3
DC 24V power section supply
4
Terminal
VIPA System SLIO
HB300 | PS-CM | | en | 17-16