VIPA System SLIO
4.2 001-1BA10 - 8xDC 0V clamps
Properties
Structure
HB300 | PS-CM | | en | 17-16
This clamp module is a "potential distributor module". The ground GND of the DC 24V
power section supply may be accessed by 8 clamp connectors of the terminal. The back-
plane bus is looped through the module. So this module has no module ID, but influences
the maximum number of modules to be connected.
n
8 clamp connectors ground GND power section supply
n
Clamp current max. 10A
n
Backplane bus looped through
n
Isolation 500Veff (field voltage to the bus)
1
Locking lever terminal module
2
Backplane bus
3
DC 24V power section supply
4
Terminal
Clamp modules
001-1BA10 - 8xDC 0V clamps
51