Siemens SINUMERIK 840D sl Programming Manual page 392

Path traversing behavior
9.3 Curve tables (CTAB)
Periodic curve table
If the master value is outside the definition range, the master value is evaluated modulo of
the definition range and the corresponding following value is output.
Note
CTABTSV, CTABTEV, CTABTSP, CTABTEP, CTABTMIN, CTABTMAX
The language commands can be used
• from the parts program or
• directly from synchronous actions.
The internal execution time of the function of
• CTABINV()P is dependent
• CTABTSV, CTABTEV, CTABTSP, CTABTEP,
of the number of table segments.
9-26
(CTABTMIN, CTABTMAX only if no interval of the master value is specified)
is independent
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
Job planning