Configure Gigabit Ethernet Adapter - Omron FJ Series Camera Setup Manual

3
After installation of camera device driver, then setup for dongle device driver starts. Please in-
stall it with default option, if there is no special reason to change.
4
After installation of dongle device driver, return to setup program (step 1.). Click End button
and restart PC.
Precautions for Correct Use
• Both FJ-S££££ and FJ-S££££2 cameras cannot be used at the same time from the PC.
• Please install either Device Driver for FJ-S£ or Device Driver for FJ-S£2.
1-3-4

Configure Gigabit Ethernet adapter

To be able to connect the camera to the Ethernet card, you must configure Gigabit Ethernet adapter.
The description in this section assume connecting one camera per one ethernet adapter. In case you
need to connect multiple cameras, please refer to Connecting multiple cameras on page 1-25 descri-
bed later.
FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)
1 Setup of Camera & Software Vision
1
1-21