Omron FJ Series Camera Setup Manual page 48

1 Setup of Camera & Software Vision
Setting for multiple camera units
 Editing FZ-Option.ini
Editing "FZ-Option.ini" for setting.
Refer to Others on page 1-15 about FZ-Option.ini.
Open "FZ-Option.ini" in text editor, add "maxCameraCount=NN" (NN = 9 to 16) in "CameraImage-
GigE" section as follows.
Precautions for Correct Use
A negative value is not allowed at "maxCameraCount", set positive integer.
 Settings for cameras with Camera Configuration Tool
Settings for cameras with "Camera Configuration Tool".
1
Launch the tool from Start menu - OMRON - Camera Configuration Tool.
2
Select camera from the list to each camera number (CameraNo).
When select CameraID cell, the connected camera list will be displayed.
3
Click OK.
1-32
FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)