Page 1
• Stabilize measurement images by filtering the required number of times. • Perform measurements according to workpiece tolerance by changing the measurement area baased on measurement results • Periodically check for data variations by outputting the maximum and minimum values for each 10 measurements, F210...
Page 2
Features Macros Augment Flow Menus using a PC text editor. The Software package can be edited using text commands to customize I/ O controls, displays, and GUI Programs can be created using only a text editor, with no need for any special development environment.
For Double-speed Camera and compatible Camera cable F150-VS F150 Cameras. Cable length: 3 m Monitor cable F150-VM Cable length: 2 m Loose-wire cable for parallel I/O connectors. Parallel cable F160-VP Cable length: 2 m Other length on request. F210 C-39...
Page 4
Position devia- Relative Position tion detection Note: These processing items are most effective when set immediately after image input processing item (Camera image input or Camera switching). Depending on conditions, however, high-speed processing may not be possible. C-40 Vision Systems...
Page 5
Classification # Brightness Density Data Note: These processing items are most effective when set immediately after image input processing item (Camera image input or Camera switching). Depending on conditions, however, high-speed processing may not be possible. Measurement Support Results Output Functions Functions •...
(Common use) Ethernet (F250) 3Z4S-LE B2514D Lighting (See note 2.) F150-LT20A Parallel Cable F150-LT50A Synchronous Sensor 3Z4S-LE B5014A Programmable Controller Note 1: Separate robot cable specifications (F150-VSB) are available. Note 2: In addition, lenses and lighting are available. C-42 Vision Systems...
Page 7
Approx. 3.7 A (when four F160-SLC50 Cameras Current consumption connected) are connected) Operating: 0 to 50°C Storage: − 25 to 65°C (with no icing or condensation) Ambient temperature Operating and storage: 35% to 85% (with no condensation) Ambient humidity 56 × 160 × 110 (W × H × D) mm (not including con- 270 ×...
Page 8
+0.5 mm 175.5 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. Q05E-EN-02 In the interest of product improvement, specifications are subject to change without notice.