9
On the GigE Camera IP Configscreen, uncheck DHCP and put a check in the box for
Persistant IP.
10
Enter the address and click Apply.
Additional Information
If it is different from the IP address set in Step 6, this setting will be reflected when the camera
is restarted.
Connecting multiple cameras
There are following ways for connecting multiple cameras.
• Install multiple network adapters.
• Use network adapter with multiple ports.
• Use switching HUB.
Refer to 1-3-6 Setup of camera connection on page 1-23 for connection settings.
FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)
1 Setup of Camera & Software Vision
1
1-25